Flywheel and Flexplate Tip

Be sure to research the right replacement part for your application. An improperly balanced rotating assembly will wreak havoc on the rest of your motor. In addition to the flywheel and flexplate, you’ll need a new ring gear plate, flywheel/flex plate bolts (optional), Loctite. New GM flywheels can be purchased from Eckler’s. It’s a good […]

Fuel Door Mod for 4th Gen Camaro

First off, you will need a fuel door off a 2000-2005 Mitsubishi Eclipse. Even though the door looks like it’s made of billet, it’s aluminum. It fits flush against the body of the car – it pops right in.
You’ll need some washers that are 1/4” – 3/8” OD, and make sure they fit the bolts […]

Carburetor Tip

When working on your carburetor, transfer the carburetor from the engine to a clean, open workbench. If you don’t have a carb stand, simply slide four bolts of your choice through the mounting holes in the bottom plate, and “nut” them up at the top. All you need is enough clearance for the levers and […]

Optin Architect