First, make sure the area you’re working on is free from wax or dirt. Use rubbing alcohol to clean the chipped area. Never use the brush that comes with the touch-up paint– it will just cause big, nasty globs and end up looking worse than the chip. Use a small artist’s grade brush and gently […]
POR-15 Tip
June 27, 2014 by Leave a Comment
Coating your surface rusted floor pans with POR-15 is a great idea. First step is to scrap away all the old surface rust with a wire brush. After the dust/rust particles have been vacuumed up, thoroughly clean the surface with POR-15’s Cleaner/Degreaser. Next comes the Metal Prep (also from POR-15), then you’re ready to apply […]



