If you’ve never used a clay bar to remove contaminants on your car’s paint, now is the time to start. This is actually such an easy and painless way to get rid of minor scuffs, bird droppings, tree sap, etc. Really, anything that is sitting ON TOP of your paint surface that won’t come out […]
Flywheel and Flexplate Tip
March 28, 2014 by Leave a Comment
Be sure to research the right replacement part for your application. An improperly balanced rotating assembly will wreak havoc on the rest of your motor. In addition to the flywheel and flexplate, you’ll need a new ring gear plate, flywheel/flex plate bolts (optional), Loctite. New GM flywheels can be purchased from Eckler’s. It’s a good […]
Engine Removal Tip
March 20, 2014 by Leave a Comment
Engine removal: If you’re renting an engine hoist, remember you’ll also need a heavy-duty chain and/or lifting plate. If you pull the motor and transmission out together as one unit, invest in a transmission tail plug to avoid trans fluid from pouring out the rear of the case during removal.
Battery Safety Tip
March 7, 2014 by Leave a Comment
To get started replacing your old battery, make sure you also buy new cables, a wire brush, and terminal ends (optional). Always remove the negative battery cable from the terminal post before the positive. Any sparks from or around the terminals could ignite battery gasses and cause personal injury. In addition to having a clean battery and fresh […]
Fuel Door Mod for 4th Gen Camaro
February 10, 2014 by 1 Comment
First off, you will need a fuel door off a 2000-2005 Mitsubishi Eclipse. Even though the door looks like it’s made of billet, it’s aluminum. It fits flush against the body of the car – it pops right in. You’ll need some washers that are 1/4” – 3/8” OD, and make sure they fit the bolts […]
