If you’re going to be removing your car’s original coil springs, you’re going to need to support the lower control arm. This can be done with a heavy block of wood and whatever further support is available (jackscrew, etc). Remember, the spring is under great pressure, and once the spindle assembly is removed, the spring […]
Lower Rear End Tip
February 10, 2014 by Leave a Comment
If you’ve invested in lowering springs for your 4th Gen Camaro or Firebird, and the rear end is still sitting a tad too high, you can get an extra ¾ of an inch or more by taking the isolator out on top of the back springs and replacing it with ½ heater hose on the […]