If you’re going to be removing your car’s original coil springs, you’re going to need to support the lower control arm. This can be done with a heavy block of wood and whatever further support is available (jackscrew, etc). Remember, the spring is under great pressure, and once the spindle assembly is removed, the spring […]
Show Judging: Restored and Modified
June 6, 2014 by 2 Comments
Restored or original areas of the vehicle Cars are classified based on the number of modifications in given sections of the car. These modified sections are marked on the dash card. Any sections that are unmarked are to be technically correct and subject to point loss for wrong parts, fit, finish, and cleanliness. There are […]
Engine Removal Tip
March 20, 2014 by Leave a Comment
Engine removal: If you’re renting an engine hoist, remember you’ll also need a heavy-duty chain and/or lifting plate. If you pull the motor and transmission out together as one unit, invest in a transmission tail plug to avoid trans fluid from pouring out the rear of the case during removal.
