Have you always loved the blacked-out tail panel look that appears on the Berger Camaros? First, remove the tail panel. Pick up a can of Krylon Fusion Satin Black, which is supposed to bond to most any plastic or coated surface without sanding or priming. Just to add an extra measure of security (and to thoroughly clean the panel) wet sand the entire panel with 2000 grit paper until the clear coat appears dull. After about 6 light coats of paint and one or two finishing coats, let it dry for a couple more hours and install it. It’s a simple job, but really adds a nice aggressive look to the back end of a 4th Gen Camaro!
Shop for Camaro parts at www.RicksCamaros.com
Follow us on our Camaro Facebook page. Click here and Like us!